/*
* Demo for RF remote switch receiver. 
* This example is for the new KaKu / Home Easy type of remotes!

* For details, see NewRemoteReceiver.h!
*
* This sketch shows the received signals on the serial port.
* Connect the receiver to digital pin 2.
*/

#include <NewRemoteReceiver.h>

void setup() {
  Serial.begin(115200);
  
  // Initialize receiver on interrupt 0 (= digital pin 2), calls the callback "showCode"
  // after 2 identical codes have been received in a row. (thus, keep the button pressed
  // for a moment)
  //
  // See the interrupt-parameter of attachInterrupt for possible values (and pins)
  // to connect the receiver.
  NewRemoteReceiver::init(0, 2, showCode);
}

void loop() {
}

// Callback function is called only when a valid code is received.
void showCode(NewRemoteCode receivedCode) {
  // Note: interrupts are disabled. You can re-enable them if needed.
  
  // Print the received code.
  Serial.print("Addr ");
  Serial.print(receivedCode.address);
  
  if (receivedCode.groupBit) {
    Serial.print(" group");
  } else {
    Serial.print(" unit ");
    Serial.print(receivedCode.unit);
  }
  
  switch (receivedCode.switchType) {
    case NewRemoteCode::off:
      Serial.print(" off");
      break;
    case NewRemoteCode::on:
      Serial.print(" on");
      break;
    case NewRemoteCode::dim:
      Serial.print(" dim level ");
      Serial.print(receivedCode.dimLevel);
      break;
    case NewRemoteCode::on_with_dim:
      Serial.print(" on with dim level ");
      Serial.print(receivedCode.dimLevel);
      break;
  }
  
  Serial.print(", period: ");
  Serial.print(receivedCode.period);
  Serial.println("us.");
}