// This example is really out of date so best to ignore it
// It is still here to create files for other tests.
/*
 * Write Example
 *
 * This sketch creates a new file and writes 100 lines to the file.
 * No error checks on write in this example.
 */

#include <SdFat.h>
#include <SdFatUtil.h> // use functions to print strings from flash memory

const uint8_t SD_CHIP_SELECT = SS;

SdFat sd;

SdFile file;

// store error strings in flash to save RAM
#define error(s) sd.errorHalt_P(PSTR(s))

/*
 * Write CR LF to a file
 */
void writeCRLF(SdFile& f) {
  f.write((uint8_t*)"\r\n", 2);
}
/*
 * Write an unsigned number to a file
 */
void writeNumber(SdFile& f, uint32_t n) {
  uint8_t buf[10];
  uint8_t i = 0;
  do {
    i++;
    buf[sizeof(buf) - i] = n % 10 + '0';
    n /= 10;
  } while (n);
  f.write(&buf[sizeof(buf) - i], i);
}
/*
 * Write a string to a file
 */
void writeString(SdFile& f, char *str) {
  uint8_t n;
  for (n = 0; str[n]; n++);
  f.write((uint8_t *)str, n);
}

void setup(void) {
  Serial.begin(9600);
  while (!Serial) {}  // wait for Leonardo
  PgmPrintln("Type any character to start");
  while (Serial.read() <= 0) {}
  delay(200);  // Catch Due reset problem
  
  // initialize the SD card at SPI_HALF_SPEED to avoid bus errors with
  // breadboards.  use SPI_FULL_SPEED for better performance.
  if (!sd.begin(SD_CHIP_SELECT, SPI_HALF_SPEED)) sd.initErrorHalt();
  
  // create a new file
  char name[] = "WRITE00.TXT";
  for (uint8_t i = 0; i < 100; i++) {
    name[5] = i/10 + '0';
    name[6] = i%10 + '0';
    if (file.open(name, O_CREAT | O_EXCL | O_WRITE)) break;
  }
  if (!file.isOpen()) error ("file.create");
  Serial.print("Writing to: ");
  Serial.println(name);
  
  // write 100 line to file
  for (uint8_t i = 0; i < 100; i++) {
    writeString(file, "line ");
    writeNumber(file, i);
    writeString(file, " millis = ");
    writeNumber(file, millis());
    writeCRLF(file);
  }
  // close file and force write of all data to the SD card
  file.close();
  Serial.println("Done");
}

void loop(void) {}